Because there are many types of hydraulic pumps in injection molding equipment at present, the same type of pump is affected by power, speed, pressure, flow rate, metal material and other factors, making the selection of hydraulic oil more complicated. Generally speaking, HL oil can be used f...

As of May 2004, the current domestic hydraulic and pneumatic standards catalog of the national Hydraulic and Pneumatic Standardization Technical Committee is summarized as follows. Among them: 79 national standards, 66 industry standards. The date number for the standard review confirmation i...

1. Bidding situation: idt or IDT means equivalent to use; eqv or MOD indicates equivalent or modified adoption; neq indicates non-equivalent adoption. 2. National standards GB/T 786.1-1993 (2001*) Hydropneumatic graphic symbols eqv ISO 1219-1:1991 GB/T 2346-200...

Compared with horizontal milling machine, the main difference is that the main shaft is vertically arranged, in addition to the main shaft layout is different, the table can be lifted up and down, and the milling cutter used for vertical milling machine is relatively flexible and has a wide r...

Due to historical reasons, China's machine tool industry more than a thousand enterprises in the domestic industrial layout convergence, resulting in the total production is not small, low-level repeated construction is serious, it can be said that the problem frequently appears, but generall...

An important electrical parameter in machine tool equipment is the effective power of the motor. This parameter can be precisely monitored with Phoenix Contact's Contactron motor manager, which can detect high overload and low load conditions immediately. Because the motor manag...